CAMLOCK COUPLING


DESIGN PRINCIPLE :

The principle behind the design of Camlock Coupling is simple pivot pins for coupler cam arms which lock into the adaptor groove are located so that when line pressure attempts
to force the camlock coupler and adaptor apart, the bottom edge of the adaptor groove pushes with equal pressure against the under edge of the cam arm, increasing the
locking action. When properly coupled, line pressure will not separate a camlock
connection with recommended pressure limits.


ADAPTOR Female Thread GAFT

ADAPTOR Male Thread GAMT

ADAPTOR pipe Flange GAPF

ADAPTOR Hose Shank GAHS

ADAPTOR Dust Plug GADP

COUPLER Female Thread GCFT

COUPLER Male Thread GCMT

COUPLER Pipe Flange GCPF

COUPLER Pipe Shank GCHS

COUPLER Dust Cap GCDC


End Connection :

Socket Weld, Hose thread, Pipe thread, Hose shank and Flanged.

Size :

"¼ to 6"

Pressure :

Upto 500 psi.

Temperature :

The coupling can handle fluids from -40ºC to 250ºC with right selection of body material and Gasket

MATERIALS BODY :

  • Available in Aluminium, Mild Steel, Brass, SS 304, & SS 316
  • Available in casting of carbon steel grade WCB or I .S . 1030, Gunmetal grade LG2C, Aluminium Bronze grade AB2C, SS 304 with c .f .0.08 & SS 316 with c.f . 0.08.

Cam Arms :

Available in casting of SS 304, with c.f. 0.08, SS 316 with c.f. 0.08 Gunmetal grade LG2C & aluminium Bronze grade AB2C

Gaskets :

Available in Nitrile, Viton, Neoprene, Silicone, Teflon.