PRODUCTS
END FITTINGS FOR TEFLON,THERMOPLASTICS,HYDRAULIC HOSES.
G1 |
G2 |
G3 |
G4 |
 |
 |
 |
 |
Metric Female Swivel |
Metric Female Swivel |
Metric Female Swivel |
BSP Female Swivel |
G5 |
G6 |
G7 |
G8 |
 |
 |
 |
 |
| BSP Female Swivel 45ºelbow |
BSP Female Swivel |
Metric Female Swivel |
Metric Female Swivel 45º elbow with 'O' ring |
G9 |
G10 |
G11 |
G12 |
 |
 |
 |
 |
| Metric Female Swivel 90º elbow with 'O' ring |
Male BSP with 60º Flare |
Male with metric thread mating |
Male NPTF |
G13 |
G14 |
G15 |
G16 |
 |
 |
 |
 |
| Male SAE with 45º tape |
Male JIC with 37º taper |
Female Swivel JIC |
Female Swivel JIC 45º elbow |
G17 |
G18 |
G19 |
G20 |
 |
 |
 |
 |
| Female Swivel JIC 90º elbow |
Female Swivel SAE |
Female Swivel SAE 45º elbow |
Female Swivel SAE 90º elbow |
G21 |
G22 |
G23 |
G24 |
 |
 |
 |
 |
SAE split flange |
SAE split flange 45º |
SAE split flange 90º |
Stand pipe |
HOSE SIZE & THREAD SIZE SELECTING CHART FOR ALL TYPES OF HOSES.
| Hose Size inches |
mm / nw | Corresponding Thread | Stand Pipe | NPTF* | |||||
| BSP inches |
NPT inches |
SAE inches |
Metric | Pipe dia mm | Length mm | Thread inches | TPI | ||
| 3/16 | 4 | 1/4 | 1/4 | 7 /16-20UNF | M12x1.5 M16x1.5 |
6 8 |
20 22 |
1/8 1/4 |
27 18 |
| 1/4 | 6 | 1/4 | 1/4 | 7 /16-20UNF 1 /2-20UNF 9 /16-18UNF 5 /8-18UNF |
M14x1.5 M16x1.5 M18x1.5 |
8 10 12 |
22 24 25 |
18 1/4 3/8 |
27 18 18 |
| 5/16 | 8 | 3/8 | 3/8 | 1 / 2-20UNF 9 /16-18UNF 5 / 8-18UNF |
M16x1.5 M20x1.5 |
10 12 |
24 25 |
1/4 3/8 |
18 18 |
| 3/8 | 10 | 3/8 1/2 |
3/8 1/2 |
1 / 2-20UNF 9 /16-18UNF 3 / 4-16UNF 7 / 8-14UNF |
M18x1.5 M22x1.5 |
12 14 10 |
25 27 24 |
1/4 3/8 1/2 |
18 18 14 |
| 1/2 | 13 | 1/2 | 1/2 | 9 /16-18UNF 3 / 4-16UNF 7 / 8-14UNF 1.1/16-12UNF |
M22x1.5 M24x1.5 M26x1.5 |
15 16 18 20 |
25 30 25 32 |
3/8 1/2 3/4 |
18 14 14 |
| 5/8 | 16 | 5/8 3/4 |
3/4 | 3 / 4-16UNF 7 / 8-14UNF 1.1/16-12UNF |
M26x1.5 | 18 20 |
25 23 |
3/4 | 14 |
| 3/4 | 20 | 3/4 1 |
3/4 1 |
7 / 8-14UNF 1.1/16-12UNF 1.3/16-12UNF 1.5/16-12UNF |
M30x1.5 M30 x 2.0 M36 x 2.0 |
22 25 |
25 34 |
3/4 1 |
14 11½ |
| 7/8 | 25 | 1 1¼ |
1 1¼ |
1.5 /16-12UNF 1.5 / 8-12UNF |
M38x1.5 M42x2.0 |
28 30 |
25 40 36 40 |
1 | 11 1/2 |
| 1 | 32 | 1¼ 1½ |
1¼ 1½ |
1.5 /16-12UNF 1.7 /8-12UNF |
M45x1.5 M52x1.5 |
38 30 35 |
38 35 30 |
1¼ | 11½ |
| 1 ¼ | 38 | 1½ 2 |
1½ 2 |
1.7 /8-12UNF 2 1/ 4-12UNF 2 1/ 2- 2UNF |
M52x1.5 M52x2.0 |
42 50 |
36 70 |
1½ 2 |
11½ 11½ |
| 1 ½ | 50 | 2 | 2 | 2 1/2-12UNF | M65x2.0 | - | - | 2 | 11½ |
| 2 | 63 | 2½ 3 |
2½ 3 |
3-12UNF |
M78x2.0 | - | - | - | - |
| 3 | 76 | 3 | 3 | - | M100x2.0 | - | - | - | - |
Note:
The National Pipe Tapered Thread for fuels is a dryseal thread used for both for male & female ends .The Interface crest and root fit of the mating threads produces the seal.
(This thread should not be confused with American Standard NPT thread which does not produce and crest and root seal.)