Camlock Coupling (GCC 7060)

Standard

BS EN 14420 - 7
MIL-C-27487

Construction

Body Material : Aluminium, Carbon Steel, Brass, SS304 & SS316, Polypropylene, Super Duplex SS, Aluminium Bronze, Inconel and other exotic material as per clients requirements
Cast carbon steel grade WCB or I.S. 1030, Gunmetal grade LG2C, Aluminium Bronze grade AB2C, SS 304 with c.f. 0.03 & SS316 with c. f. 0.08
PTFE Lining

Cam Arms Material : Casting of SS304 (CF8), SS316 (CF8M), SS316L (CF3M)
Gunmetal grade LG2C & Aluminium Bronze grade AB2C

Gasket Material : Nitrile, Viton, Neoprene, Silicone, Hypalon, PTFE or as per client’s requirement

End Connection : Socket Weld, Hose thread, Pipe thread, Hose shank and Flanged

Sizes : ½” to 6”

Working Pressure : Up to 500psi

Temperature : -40°C - 250°C

The principle behind the design of Camlock Coupling is simple. Pivot pins for coupler cam arms which lock into the adaptor groove are located so that when line pressure attempts to force the camlock coupler and adaptor apart, the bottom edge of the adaptor groove pushes with equal pressure against the under edge of the cam arms, increasing the locking action. When properly coupled, line pressure will not separate a camlock connection within recommended pressure limits.

Adaptor Female Thread GAFT

Adaptor Male Thread GAMT

Adaptor Pipe Flange GAPF

Adaptor Hose Shank GAHS

Adaptor Dust Plug GADP

Coupler Female Thread GCFT

Coupler Male Thread GCMT

Coupler Pipe Flange GCPF

Coupler Hose Shank GCHS

Coupler Dust Cap GCDC

Type

Adaptor : Female Thread GAFT
Male Thread GAMT
Pipe Flange GAPF
Hose Shank GAHS
Dust Plug GADP
Coupler : Female Thread GCFT
Male Thread GCMT
Pipe Flange GCPF
Hose Shank GCHS
Dust Cap GCDC