Heat and Coolant – Traced Hoses

Heat and Coolant – Traced Hoses

For the Internal hoses and the Jacketed hoses, our stainless steel corrugated hoses is used with stainless steel braiding.

Core & Jacket : SS304/304L/316/316L/321
Braid Material : SS304/304L/316/316L
Operating Temperature : 400°C max. (600° C is possible as a special design).

Application

When ordinary insulation is not sufficient for certain applications, or when specific minimum temperatures are needed to convey viscous substances, traced piping is generally used; this consists of two tubes, one inside the other, with various differences in cross-section.

One of the tubes, generally the inner one, carries the medium, and the other one carries a heating or cooling agent; sometimes it is the other way around. In other cases, the external tube is used as a safety measure.

Occasionally, such traced piping has to be flexible; for such applications we supply our Jacked hoses.

Its high flexibility makes Jacketed hoses very suitable for angular and lateral (offset) movement. The Jacketed hoses are pressure and vacuum proof and due to the materials used for its manufacturing. it is resistant to temperature and corrosion. The large surface area of the corrugated section results in particularly high heat transfer efficiency, the hoses combining the functions of a flexible conduit and a highly efficient heat exchanger in the simplest possible form.

The JACKETED hoses are suitable for many different purposes.

As a heat-able element Jacketed hoses are mainly used in the chemical , pharmaceutical, oil and civil engineering machinery industries to convey viscous or temperature – sensitive media, such as

  • Bitumen
  • Fats
  • Naphthol
  • Phenol
  • Polyster
  • Mercury
  • Sulphur
  • Fatty acids
  • Paraffin
  • Tar
  • Chlorophenol
  • Chocolate
  • Heavy fuel oil
  • Naphthalene
  • Explosive (TNT)
  • Thermosetting Plastic
  • Dimethyl terephtlate (DMT)
  • Synthetic resin
  • Organic liquefied materials
  • Phthalic acid, waxes and others

The heating agents used are hot water, steam, heat transfer oils or other heat transfer agents. For cooling, water is the most common agent.

Jacketed Hoses Specification

Core (Internal Hoses)
Jacket Tracer Conduit
Threaded Connection (Pipe Thread inches)
10
25
3/8
16
32
3/8
20
40
1/2
25
50
1/2
32
50
1/2
40
65
1/2
50
80
3/4
65
100
3/4
80
125
3/4
100
150
3/4
125
175
1
150
200
1
200
250
1

Couplings

As a connection for the heating or cooling medium, one weld-neck flange or union is provided at each hoses end of the tracer conduit, the two connections being offset by 180° in relation to one another.